Connect your repair workstation directly to an official physical Infinity CM2 (Chinese Miracle 2) Dongle over the network with the 40-Minute Remote USB Share Service on GrandUnlock. Built for mobile software technicians, refurbishment engineers, and diagnostic workshops needing rapid hardware authorization for single-device repair jobs, firmware extraction, or security recovery, this service bridges a genuine Infinity smartcard directly to your local PC via high-performance USB redirector technology—eliminating the need for physical hardware ownership or shipping delays.

- Session Duration: 40 Consecutive Minutes of dedicated, exclusive remote USB dongle access starting once the virtual smartcard connection is established.

- Full Access to Official Infinity CM2 Software Modules:

  * CM2MT2 (MediaTek Platform): Comprehensive support for MTK BROM/Preloader operations, scatter-based firmware flashing, full factory dump extraction (read flash), NVRAM/NVDATA baseband repair, and FRP/user lock wipe.

  * CM2SP2 (Unisoc / Spreadtrum): Deep diagnostic communication, PAC firmware writing, direct security partition restoration, and screen lock removal across SC6531, SC7731, and Tiger/Unisoc T-series processors.

  * CM2QLM (Qualcomm Module): Emergency Download (EDL 9008) partition flashing, raw GPT read/write/erase, and diagnostic COM routines.

  * CM2RDA / Feature Phone Modules: Flashing, memory dump, and code reading for RDA, Coolsand, and keypad feature phones.

- Low-Latency Network Routing: Optimized high-speed server endpoints ensure seamless smartcard APDU exchanges without communication timeouts or handshake drops.

- 100% Digital Remote Delivery: Easily connects using standard USB sharing client software (USB Redirector Client)—no physical dongle shipment required.

Important Guidelines & Technical Rules:

1. Prerequisite Setup Mandatory:

   - Download and install the specific Infinity CM2 module setups (e.g., CM2MT2, CM2SP2) and all prerequisite USB drivers (MediaTek VCOM/Preloader, Spreadtrum SPD, Qualcomm 9008) on your PC BEFORE requesting the connection.

   - Install the required client software (**USB Redirector Client**).

2. Dedicated Single-Session Policy:

   - The shared dongle port is assigned exclusively to your connection for the entire 40-minute duration.

   - Any attempt to split, proxy, or forward the virtual USB connection to third-party machines will result in an immediate session kill with NO REFUND.

3. 40-Minute Timer:

   - The 40-minute timer starts the moment the virtual Infinity Smart Card is detected and mounted in your Windows Device Manager.

   - Have the target handset prepared (correct boot keys, testpoint ready, or firmware file unzipped) to maximize your bench productivity during the active window.

4. Server Operations / Online Credits:

   - This service provides unrestricted access to the physical dongle's smartcard authorization and offline tool operations. Online server credits or separate credit-based vendor authorizations (if applicable) are not included.

5. Non-Refundable Digital Service:

   - Once the remote port has been shared and the smartcard is active on your workstation, the service cannot be canceled or refunded.

How to Connect & Use:

1. Download and install your required Infinity CM2 software module (CM2MT2, CM2SP2, etc.) from the official Infinity support portal.

2. Download and install **USB Redirector Client** on your 64-bit Windows PC.

3. Place your order on GrandUnlock and include your Remote Connection details (IP address or connection ID) in the order note field.

4. Launch USB Redirector Client, connect to the GrandUnlock server address provided on your dashboard, and click "Connect" on the shared Infinity CM2 Dongle.

5. Verify in Windows Device Manager that the virtual smart card reader is present and recognized.

6. Run your CM2 module as Administrator and carry out your flashing or unbrick

operations during your active 40-minute window.